GT Shine logo
GT Shine logo

All articles

Unleash the Power of a Pristine Clean: A Comprehensive Guide to Using GT Shine Ceramic Boost ShampooUpdated a year ago

GT Shine Ceramic Boost Shampoo is specially formulated to deliver exceptional cleaning performance and provide your vehicle with a stunning, head-turning shine. 

In this comprehensive guide, we will walk you through the proper techniques and best practices for using GT Shine Ceramic Boost Shampoo, ensuring a thorough and effective wash process. 

Whether you're a seasoned enthusiast or new to car care, follow these instructions to achieve a flawless and pristine clean.


Before you begin, it's essential to ensure that your vehicle and surrounding conditions are suitable for optimal results:

  1. Apply the shampoo to cool or cold surfaces only. Avoid applying in direct sunlight, as it may lead to premature drying and potential streaking.
  2. Shake the bottle well before usage. This ensures that the ingredients are thoroughly mixed for maximum effectiveness.


  1. Prepare the Shampoo Solution: Start by pouring 1-2oz (30-60ml) of GT Shine Ceramic Boost Shampoo into a clean bucket. Fill the bucket with water at a 1:100 ratio, thoroughly mixing the shampoo until it creates a rich, foamy lather.
  2. Set Up the Rinsing Bucket: Prepare a second bucket filled with clean water, which will be used for rinsing the wash mitt to remove any contaminants.
  3. Pre-Rinse Your Vehicle: Using a high-pressure water hose, pre-rinse your vehicle to remove loose dirt, grime, or debris. This step helps agitate and dislodge any stubborn particles from the surfaces, ensuring a cleaner wash.
  4. Start Washing Panel by Panel: Dunk a clean wash mitt into the shampoo solution, saturating the mitt with a thick lather of soapy water and foam. Begin washing your vehicle panel by panel, starting with the least dry body panel.
  5. Rinse and Repeat: After washing one panel, dunk the wash mitt into the second bucket filled with clean water. Rinse the mitt thoroughly, ensuring all abrasive particles are removed. This step helps prevent scratching or marring the paintwork.
  6. Proceed with the Wash: Once the wash mitt is visibly clean and free of any abrasives, return to the shampoo solution in the first bucket, re-saturating the mitt with a fresh lather. Repeat the process for each body panel, ensuring thorough coverage and effective cleaning.


By following these step-by-step instructions, you can harness the power of GT Shine Ceramic Boost Shampoo and achieve a pristine, head-turning clean for your vehicle. 

With proper preparation, a well-mixed shampoo solution, and the use of a clean wash mitt, you'll effortlessly remove dirt, grime, and contaminants, leaving behind a dazzling finish. 

Embrace the exceptional cleaning performance of GT Shine Ceramic Boost Shampoo and elevate your car care routine to a new level of excellence. Experience the satisfaction of a brilliantly clean vehicle that turns heads wherever you go.

Was this article helpful?